G-Line™ Pigtails Info

.
G-Line™ Pigtail Kits (GuitarLines) plug into a BaseSnake channel to make 1/4” lines for guitar signals, amp footswitch lines, etc.

NOTE   When using a G-Line™ to carry audio guitar signal, use at least one buffered FX pedal between the guitar and G-Line™ (most pedals are buffered). See Preserving Tone with PedalSnake.













G-Line™ Pigtail Features

  • Offered in 2-Packs One Pigtail for each end of a BaseSnake channel.

  • Have one straight end For easy plugging and unplugging at the amp

  • Have one right-angle end For saving space on pedalboards.

  • Both ends are 15” long

  • Terminate in female 5pin DIN connectors To plug into any 3wire or 5wire BaseSnake channel.

  • Kits available for Sinlge mono, dual mono, and stereo.















Three G-Line™ Pigtail Models

RS1 Single G-Line Makes one mono 1/4” guitar cable. It can be used for any guitar audio signal lines, or amp footswitch lines. Works on any 3wire or 5wire BaseSnake channel.

RS2 Dual G-Line Makes two mono 1/4” guitar cables from one BaseSnake channel. This saves channels when making send-returns for FX Loops, or when taking signal out to pedals from a wireless at the backline, and then returning it to the amp, etc. The 2 sides share a ground wire. Works on any 3wire or 5wire BaseSnake channel.

RS1-TRS Stereo G-Line Makes a single stereo 1/4” guitar cable. It can be used for stereo signals, or amp footswitch lines. Works on any 3wire or 5wire BaseSnake channel.
PedalSnake® is the trademark for Stage Magic Inc’s All-In-One Stompbox Cable. Copyright © 2015 Stage Magic, Inc.






























Privacy Policy